Compatible Systems MicroRouter 900i Instrukcja Użytkownika Pobierz pdf (Strona 31)

Section 4 - CNC Machine Operation - 31Microrouter CNC Machine User's Manual

4: Part Manufacture -

Table Vacuum Pump & Emergency Stop

Table Vacuum Pump Control.

This switch (see photo p30) operates the integrated pump, used with

the optional vacuum table, described in Section 6 - Work holding.

Switching the Pump On.

The switch becomes operational when a successful communication

link is established between the Microrouter and the CNC machine

controller PC. To switch on the vacuum pump, lift the cover and

press the square, green, button once.

Switching the Pump Off.

To switch off an operating vacuum pump, lift the cover and press the

square, green, button once. Note that a safety feature prevents the

pump from being switched off when either the spindle is rotating or

the CNC control software is operating in Auto mode (ie,

automatically running the loaded CNC program). If you need to

switch off the pump in these circumstances, you must stop the spindle

and or CNC program, then switch the CNC control software to

operate in Jog mode (ie, manual control of the machine).

Emergency Stop Button.

Pressing the emergency stop button (see photo p30) has the effect of

stopping all axes and spindle movements immediately.

To active an emergency stop, press the button in until it clicks. The

emergency stop button will remain closed (continuing to cut all power to

the machine drives) until the button is released. To release, turn the

button clockwise until it springs back out.

Activating an

emergency stop will

also trigger the

interlock guard switch.

This will prevent a

closed safety guard

door from being

opened.

Note

Denford recommends

that the vacuum

cleaner used for dust

extraction should have

a minimum power

rating of 500 watts.

Cyclonic models,

such as the Dyson,

are not suitable for use

with the dust extraction

system.

Note

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 93 94

Komentarze do niniejszej Instrukcji

Brak uwag

Compatible Systems MicroRouter 900i Instrukcja Użytkownika Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Compatible Systems MicroRouter 900i