Compatible Systems MicroRouter 900i Instrukcja Użytkownika Pobierz pdf (Strona 22)

22 - CNC Machine Installation - Section 3 Microrouter CNC Machine User's Manual

3: Component Connection Schematic Diagram

Mains Power

Supply Plug.

Denford Microrouter

CNC Machine.

To the

Port

labelled

RS 232.

Personal

Computer

(PC).

Ancillary Equipment, such as

printers or scanners, may also be

connected to the Parallel port on

the PC.

Desktop Tutor (when

available) connects to the

PC port labelled COM 1.

To COM 1 Port.

To COM 2 Port.

9 to 25 Pin D

Serial Cable*.

Security Dongle.

To Parallel Port.

The RS232 serial cable connects the Microrouter to the PC port labelled COM 2. The RS232 cable is the long, thin cable fitted with a 9 pin D female

connector at one end and a 25 pin D male connector at the opposite end. Connect the 25 pin D male end of the RS 232 cable to the 25 pin D female

RS 232 port on the righthand side panel of the Microrouter. Connect the remaining 9 pin D female end of the RS 232 cable to the 9 pin D male COM2

port on your PC. Note - a 9 pin to 25 pin adapter may also be required if your COM port has a 25 pin connection.

* Note

PC Terminology: The COM ports on your

PC may be labelled as Serial ports. Most

COM ports have a 9 pin D MALE

connector, though some older computers

may be fitted with 25 pin D MALE

connectors. The Parallel port on your PC

may be labelled as the Printer port. The

printer port has a 25 pin FEMALE

connector.

Note

9 to 25 Pin D

Serial Cable*.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 93 94

Komentarze do niniejszej Instrukcji

Brak uwag

Compatible Systems MicroRouter 900i Instrukcja Użytkownika Strona 22

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Compatible Systems MicroRouter 900i